Özkanoğlu journal
How to read window specifications
Distinguish profile depth, Uf, Uw, glazing and test classes. A practical guide to comparing window quotations with matching dimensions and components.

One figure does not describe a complete window
The first question in a window quotation is not which option has the lowest number or the most chambers. Establish which system is offered, at what size, with which glazing and hardware. Even variants in the same product family can produce different results.
Separate profile dimensions from insulation values
ADOPEN specifies an 80 mm profile and eight chambers for its 888 Series. These describe the profile construction; they do not alone state the thermal or acoustic performance of a finished window. Our catalogue lists this system as PASİFİK 888.
- Uf: Describes the thermal transmittance of the frame.
- Ug: Describes the thermal transmittance of the glazing.
- Uw: Describes the complete window, including the frame, glazing and edge effects.
A lower thermal transmittance indicates less heat transfer, but the quantity being compared must be the same. Ranking one product’s Uf against another product’s Uw is not a like-for-like comparison.
Ask about the variant and test configuration
REHAU publishes separate values for ARTEVO and ARTEVO max, with specific glazing and window dimensions behind its example Uw result. Seeing ARTEVO on a quotation does not mean every component from that example is included. Confirm the proposed variant and glazing specification in writing.
Acoustic insulation, air permeability, watertightness and wind resistance are separate assessments. Reynaers’ CP 155 brochure also states that performance results relate to specific configurations and opening types. Read a quoted figure alongside the variant, test standard and components needed to achieve it.
Compare quotations using the same questions
- Are dimensions, panel arrangement and opening type identical?
- Are the system, profile variant, glazing and hardware specified?
- Does the thermal figure describe the frame, glass or complete window?
- Is the requested performance supported by a manufacturer’s document or project calculation?
- Are installation joints, removal, handling and delivery clearly included or excluded?
Include your priorities in your quotation request. A value on a technical page is not an automatic performance guarantee for your project. The final specification and installation details require confirmation.
Sources and scope
Manufacturer information checked on 18 November 2026. This guide helps you compare quotations; it is not a project performance certificate or approval.